question

immowetzel avatar image
immowetzel asked mnakamura answered

how to cleanup STC controller from former firmware

It look like the disc is not cleaned after failed SW downloads from the controller of the N12U.
stuck in 5.30 and not able to download 5.36. Failure is:


3/2/2023 19:49:09 .2 Error Other Admin: Install Raw Image 1 failed with error: CCommandErrorException An error occurred when upgrading the firmware for chassis 10.160.6.154: Failed to write tarball file stc_chassis_installer-5.36.1956-fs-1.1.tgz on chassis 10.160.6.154. Please check network condition, reboot equipment and reinstall.

.

There is no issue at the network... it just a pc a switch and the testcenter.
Reboot done 3 times.
tgz md5 checksums are double checked. There are fine too.

How can I run a disc test and a disc clanup


Spirent TestCenter (STC)
10 |950

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

1 Answer

·
mnakamura avatar image
mnakamura answered

You could reimage the SSD using the image and procedures from https://support.spirent.com/SpirentCSC/SC_KnowledgeView?cid=null&id=FAQ19322

10 |950

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.