Spirent C1 Port group issue need add each port in different group or use them as independent ports

Question

question

ArtisticIndigoEgg asked May 30, '22 mnakamura answered May 31, '22

Spirent C1 Port group issue need add each port in different group or use them as independent ports

there are 2 Port Groups in my Spirent Test Center C1

Group 1 : Port 1 and Port 2 (optical Ports)

Group 3 : Port 3 4 5 6 (copper Ports)

how to remove the group as due to this only 1 user at a time reserves the complete tester if he need 1 optical and 1 copper port.

if all ports are independent and not part of same group and anyone want to use 2 ports only then it will be possible for user to reserve only 2 ports (1 optical and 1 copper) and other ports can be used by other users

please suggest how to remove the port group in Spirent Test Center C1.

Spirent TestCenter (STC)tester port group issue

10 |950

Attachments: Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

Answer 1 · 2022-05-31T13:11:23Z

mnakamura answered May 31, '22

In the GUI application go to Tools->Firmware Management then select Activate Test Module Profile. Check what is the Current Profile. If set to Default, it should allow individual port selection.

10 |950

Attachments: Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

Answer 2 · 2022-05-30T13:12:23Z

ArtisticIndigoEgg answered May 30, '22

example i m selecting only 1 port in optical reserve other port and same way happen for copper ports

10 |950

Attachments: Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

question