question

cschmutz avatar image
cschmutz asked qerryp answered

automatic boot of SPT after power outage

this is not a question but more of a fyi or recommendation to improve the following FAQ

https://support.spirent.com/SC_KnowledgeView?Id=FAQ14097

I just changed my SPT-N11U to boot automatically as it is anyways connected to a remotely managed PDU

in order to make this work I want to highlight, dont forget to connect the monitor! the display on front panel only lights up and shows something after boot process into android started (post bios menu)

in order to break into bios you need to enter ESC or DEL, not F2

and the setting is in the chipset section. there is no power menu

spt-n11ubootpowerbios
img-9367.jpg (71.9 KiB)
img-9368.jpg (106.7 KiB)
10 |950
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

1 Answer

·
qerryp avatar image
qerryp answered

It is better to switch on the system in the safe mode so that the peripherals gets booted properly and there should be no system failure afterwards. Visit https://errorcode0x.com/resolve-kaspersky-antivirus-error-1922/ for more.

10 |950
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.