question

gretztx avatar image
gretztx asked

TL1 prompt not found

The response below cannot find the prompt so the system hangs. I suspect the escaped quotes (\") in the message portion is the problem. My work around is to change the completion criteria from TL1 to something else AND add a filter to remove all \” from the response. However, when we do that iTest no longer tries to map the response using TL1 so the response filter doesn’t help really.

Below is the response. Note the \" littered through out the response.

<

AN7360-2 17-01-31 15:41:48

M 0 COMPLD

/* rtrv-ont:AN7360-2:ont-1-1-1-1-1 */

"ONT-1-1-1-1-1::BTRYBKUP=NO,BERINT=8000,DESC1=\"G-240G-A\",DESC2=\"NULL\",

PROVVERSION=\"*\",SERNUM=ALCLFADA0989,SUBSLOCID=\"WILDCARD\",

SWVERPLND=\"3FE56398ADBC38\",FECUP=DISABLE,POWERSHEDPROFID=0,

POWERSHEDPROFNM=NULL,ONTENABLE=AUTO,P2PENABLE=DISABLE,OPTICSHIST=DISABLE,

PLNDVAR=\"\",DLSW=\"DISABLED\",EQPTVERNUM=3FE55691AAAA01,

SWVERACT=3FE56398ADBC38,SWVERPSV=3FE56398ADBC34,VENDORID=ALCL,

EQUIPID=BVMDC00CRAG240GA,NUMSLOTS=2,NUMTCONT=32,NUMTRFSCH=32,NUMPQ=128,

RFFILTER=2,USPOLICEMODE=LOCAL,AESENABLE=ENABLE,VOIPALLOWED=YES,

SLIDVISIBILITY=DISABLED,YPSERNUM=YP1429A03E7,LOID=\"\",

CVLANTRANSMODE=REMOTE,BRIDGEMAPMODE=1-MP-BRIDGE-MAP-FILTER,

IPHCALLOWED=DISABLE,OPERATORVER=CTCV2.0,ACTONTTYPE=SFU,

ACTTXPWRCTRL=TXANDRX,SNBUNDLECTRL=UNBUNDLE,SNBUNDLESTATUS=IDLE,

OLTDSCPPBITALIGN=DISABLED,PLNDCFGFILE1=\"DISABLED\",

PLNDCFGFILE2=\"DISABLED\",DLCFGFILE1=\"DISABLED\",DLCFGFILE2=\"DISABLED\",

USTCPOLICEMODE=LOCAL:IS-NR"

;

<

iTestprompttl1
10 |950

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

0 Answers

·

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.